Aquamist HFS-6 Methanol/H20 Kit
Over the last few years, demand for great engine power output is increasing. Cubic inches option is no longer the norm. Squeezing out 200-300hp per litre is within the reach of the ordinary folks on the street. The tuning industry has grown to embrace new tuning technique as well as readily affordable components to produce powerful and reliable engines.
Aquamist has came to terms with the inevitable. Meeting the demands of the market and offering new systems capable of supporting engine power output up to 1000+ BHP. The HFS-6 reads the duty cycle of a fuel injector which delivers water proportional to fuel flow. Water quantity is metered by a High speed inline valve and flow is monitored by a turbine flow sensor.
For clogged jet and severed hose situations, a number of options are available for the user to limit engine power in the absence of water flow. We believe the HFS-5 meets all the requirement of a high-end water injection system for achieving fast engine transient and responses with absolute precision. Tracking the fuel delivery is the most reliable method to deliver your fluid flow under the whole engine operating cycle. Anything short of this means having to tailor your fuel map to compensate for the irregular fluid quantity ingested by the engine.
Be sure to ask FLI for a custom tune using this system. Package prices are included if FLI installs and tunes the Aquamist HSF-6 kit. Whether you road race, autocross or drive on the street this kit will increase power throughout the rpm band.
System Overview
- Constant pressure system - very low pressure ripple (factory set to 125psi)
- High speed PWM valve ensure accurate flow control against fuel duty cycle
- Fast dymanic response time to load and RPM change
- Consistant droplet size due to high system pressure under all conditions
- Powerful 150 Watt Shurflo pump motor capable of maintaining flow beyond 2 litre/minute
- DDS3 (bundled) ensures flow is monitored constantly for clogged jet or cut hose
- 2x failsafe channels to perform advanced failsafe tasks such as boost cut, map switch, etc. (STAND ALONE ECU ONLY)
- Water and methanol compatible (0-100%)
